Limited Offer – Get Up To $1500 OFF
Offer expires in:
Limited Offer – Get Up To $1500 OFF
Offer expires in:
A heat pump is one of the largest purchases your home will ask you to make. We measure your house before we quote it, install it properly, and back the workmanship for up to ten years.
(48 Reviews)
Installation Warranty
Liability Insurance
Tempra HVAC is a licensed, bonded, and insured Washington contractor, license TEMPRHL753QQ, based in Bellevue. The company installs and replaces ducted and ductless heat pumps across Bellevue and the Eastside. Work is done by EPA certified technicians using precision load calculations. Installation work carries a warranty of up to ten years, and in-home estimates are free.
Most heat pump complaints trace back to the day it was installed, not the equipment. Wrong size, wrong placement, or ductwork nobody checked.
So heat pump installation Bellevue work starts with your house. Square footage, insulation, windows, and existing ducts all feed a load calculation that decides the size. That step separates a system you forget about from one you argue with. Installation sits alongside our full HVAC repair and maintenance service.
Replacement rarely announces itself. These signs usually mean heat pump replacement Bellevue homeowners should plan now.
Replacing at end of life is the cheapest moment to switch. You are buying equipment anyway, so the upgrade costs less than it looks.
A heat pump adds air conditioning while replacing your heat. One system, one install, both seasons covered.
These are the most expensive way to heat a home. Switching to a heat pump usually produces the biggest bill drop we see.
Two service calls in a season is a pattern, not bad luck. At that point repair money is rent, not investment.
One room bakes while another freezes. Zoned ductless heads fix comfort problems ducts were never going to solve.
Garages, basements, and bonus rooms rarely get proper ductwork. A single ductless zone is usually simpler than extending the system.
Old equipment loses efficiency quietly. If your usage held steady and the cost did not, the system is telling you something.
Payback on efficiency needs years to arrive. If this is your long term home, the math works strongly in your favor.
Replaces a furnace directly and uses the vents already in your walls. Nothing visible changes inside the house.
Leaky or undersized ductwork will limit any system. We inspect what you have before recommending it.
Wall mounted heads connect to a small outdoor unit through a three inch hole. No ductwork to build.
Each head has its own thermostat, so bedrooms and living areas stop fighting each other.
One outdoor unit can run several indoor heads. Common in older Eastside homes with no duct runs.
The heat pump handles most of the year and the furnace covers the coldest snaps. A sensible middle path.
They mount high on a wall and you will see them. Worth knowing before you decide, not after.
The answer depends on your ducts, your layout, and your budget. The estimate visit settles it.
That is exactly what the free in-home visit is for. We measure, explain the options, and leave you with a written quote.
An air-source heat pump is an energy-efficient HVAC system that transfers heat between your home and the outdoor air. It provides both heating in the winter and cooling in the summer, making it a versatile, all-in-one comfort solution. Instead of generating heat, an air-source heat pump transfers heat from the outside air into your home during winter. In summer, it reverses the process, removing heat from inside your home to keep it cool.
A ductless mini-split heat pump is a highly efficient heating and cooling system that delivers personalized comfort without requiring ductwork. It consists of an outdoor unit connected to one or more indoor air handlers, making it ideal for individual rooms, home additions, and homes without existing ducts. Ductless mini-split heat pumps provide efficient, year-round heating and cooling with precise temperature control for every room.
High-efficiency heat pumps are advanced HVAC systems designed to deliver exceptional heating and cooling while using significantly less energy than conventional systems. They provide year-round comfort, lower utility costs, and improved indoor climate control. High-efficiency heat pumps maximize comfort while minimizing energy consumption. With advanced inverter technology and superior performance, they help reduce energy bills and maintain consistent throughout the year.
The old worry was that heat pumps quit in the cold. That was a fair concern once, and it does not describe this climate or this equipment.
Bellevue sits in a marine climate where hard freezes are uncommon. Temperatures here rarely drop to the range where older heat pumps struggled.
Modern variable speed units are rated to keep producing heat well below freezing. The technology moved a long way in ten years.
Washington has some of the lowest electricity rates in the country. That directly lowers what a heat pump costs to run.
Half of homes here still have no air conditioning. A heat pump solves that in the same install, at no extra equipment.
Plenty of Eastside houses already have ducts from a furnace. That makes a ducted swap simpler than owners expect.
If your home needs it, we design in electric backup or keep the furnace as a hybrid. Nobody gets left guessing in January.
The question is not whether heat pumps work. It is which heat pump installation Bellevue homes need.
Efficiency numbers are easy to quote and hard to feel. These are the differences homeowners tell us about after the first year.
Ask about utility rebates during your estimate. Programs change, and eligibility depends on your utility and your home.
The same equipment heats in January and cools in August. You stop maintaining two systems and stop paying to install a second one later.
No gas, no flame, no flue gases. That removes carbon monoxide risk from the heating side of your home entirely.
A heat pump moves heat instead of making it. That is why it delivers more warmth per unit of energy than a furnace or baseboard can.
Variable speed units run long and low instead of blasting on and off. Rooms hold their temperature and the noise fades into the background.
Tempra HVAC holds Washington license TEMPRHL753QQ, a $30,000 surety bond, and a $1,000,000 liability policy. All three are public record, so verify them before you book anyone.
Manufacturer warranties cover the equipment. Ours covers the heat pump installation Bellevue homes get, up to ten years.
Our EPA certified technicians run precision load calculations before recommending anything. Oversized systems short cycle, undersized ones never keep up.
The in-home estimate costs nothing and comes with a real design, not a ballpark. We run a strict no shortcuts policy, so nothing gets rushed to hit a schedule.
years
Our certified HVAC technicians.
(70+ Rating)
(48+ Google Review)
Our shop sits in Bellevue, so your Eastside call is usually a short drive away. We cover heat pump installation Seattle homeowners need as well.
King and Snohomish County
Across Bellevue we cover West Bellevue, Crossroads, Factoria, Somerset, Newport, and Lake Hills. Not on the list? We serve 21 cities across both counties, so call and ask.
We measure first. Heat pump installation Bellevue quotes cover rooms, insulation, ducts, and electrical.
You get a sized system, the equipment options, and a fixed price in writing. Questions answered before anything is signed.
Most homes are finished in one to two days. We protect floors, haul the old system away, and keep the site clean.
We verify airflow, charge, and controls, then show you how to run it. The warranty starts on a system proven to work.
Heat pump cost Bellevue homeowners see varies more than most home projects. Three things move the number more than the brand on the box.
Size, insulation, and layout set the capacity. A larger or leakier home needs more system, and no honest quote skips that step.
Reusing sound ductwork keeps costs down. Repairs, new runs, or a ductless design all change the scope.
Variable speed and cold climate models cost more and run better. Panel capacity sometimes needs work too.
Your written quote breaks all of it out line by line. Financing is available if the timing is awkward.
Existing system acting up? We repair ducted and ductless heat pumps.
Furnace, AC, and whole system care once your install is done.
Spread the cost of a new system across manageable payments.
That is exactly what the free in-home visit is for. We measure, explain the options, and leave you with a written quote.
Yes, and this is one of the better climates for them. Western Washington sits in a marine zone where hard freezes are uncommon. A heat pump runs efficiently through most of the heating season here. Modern cold climate models keep producing heat well below freezing. For the rare deep cold snap, we design in electric backup or keep your furnace as a hybrid.
Installed cost varies widely because the work varies widely. Home size, ductwork condition, equipment tier, and electrical capacity all move the number. Bellevue sits at the higher end of Washington pricing because labor costs more here. Your free in-home estimate produces a fixed written figure rather than a range, and financing is available.
The federal 25C tax credit expired on 31 December 2025 and does not apply to systems installed in 2026. What remains is utility and state money. Heat pump rebates Bellevue homes can access usually come through Puget Sound Energy, not Seattle City Light. Washington also funds income qualified rebates through the Climate Commitment Act. Amounts and eligibility change, so confirm current terms with your utility before budgeting.
If you already have sound ductwork, ducted is usually simpler and nothing visible changes indoors. If you have no ducts, ductless heat pump installation Bellevue homeowners choose gives real zone control. The same applies to rooms that never hold temperature. No duct runs to build. Many Eastside homes end up with a mix. The estimate visit settles it, because the answer depends on your layout.
In most Bellevue homes, yes. A correctly sized heat pump handles the full heating load for this climate and adds cooling at the same time. Some homes are better served by a hybrid setup that keeps the furnace for the coldest days. The load calculation tells us which situation you are in.
Most heat pump installation Bellevue jobs, including replacements, finish in one to two days. Ductless multi zone systems and jobs needing duct or electrical work run longer. You get a schedule with the written quote, so the timeline is agreed before we start.
That comes from a load calculation, not a rule of thumb based on square footage. We measure rooms, insulation, windows, and existing ductwork to work out the actual heating and cooling load. Oversized systems short cycle and wear out early. Undersized ones never quite keep up on the days you need them.
Our team answers heat pump questions all day, so send yours over.
Talk to a real person about your system, day or night.
+1 (206) 466-0202
