Limited Offer – Get Up To $1500 OFF
Offer expires in:
Limited Offer – Get Up To $1500 OFF
Offer expires in:
A new air conditioner only hits its rated efficiency when both halves are a certified pair. We install matched systems, hand you the paperwork, and back the work for up to ten years.
(48 Reviews)
Installation Warranty
Liability Insurance
Tempra HVAC is a licensed, bonded, and insured Washington contractor, license TEMPRHL753QQ, based in Bellevue. The company installs and replaces central air conditioning across Bellevue and the Eastside. Equipment is AHRI matched and sized by load calculation. Work is carried out by EPA-certified technicians. Installation carries a warranty of up to ten years, and in-home estimates are free.
The cheapest quote you get will usually be for the outdoor unit alone, leaving your old indoor coil in place. That is where efficiency quietly disappears.
A rated efficiency belongs to a specific outdoor unit paired with a specific indoor coil. Split that pair and the number on the box stops being true. Each AC installation and replacement Bellevue job is quoted as a matched pair. Cooling work sits alongside our full HVAC repair and maintenance service.
Replacing before a failure is always cheaper than replacing during a heat wave. These signs mean AC replacement Bellevue homes should not wait.
Anything built before roughly 2010. That refrigerant is out of production, so a single leak can cost more than the unit is worth.
Cooling equipment lasts well here because the season is short. Past fifteen, one failure usually brings another close behind.
The single most expensive part in the system. On an older unit, replacing it rarely makes financial sense.
Roughly half the homes in this region still do not. Adding a system is a project, not a repair, and it starts with your ducts.
Topping up every summer means a leak nobody found. Repeated recharges add up faster than most homeowners realize.
Upstairs bakes while downstairs freezes. That is usually sizing or ductwork, and replacement is the moment to correct both.
Old units lose efficiency quietly. A 2005 system delivers far less cooling per unit of power than anything sold today.
Replacing both together costs less than two separate jobs, and it lets us match the coil and blower properly.
An outdoor condenser plus a coil above your existing furnace. The standard air conditioning installation Bellevue homes with ducts get.
Yes, it is usually possible. The question is whether ducts sized for heat can carry the airflow cooling needs.
Same outdoor box, but it heats as well as cools. Worth pricing whenever your furnace is also nearing the end.
Additions, converted garages, and rooms the ducts never reached. Often paired with a central system rather than replacing it.
On or off, nothing in between. Lowest price, quickest cooling, and the most noticeable temperature swings.
Run longer at lower output. Better humidity control, quieter operation, and steadier rooms for a higher price.
Federal rules set a floor, not a target. Going above it costs more up front and less every August.
Capacity comes from a load calculation, not from the size of the old unit. Many existing systems were oversized to begin with.
We will tell you honestly. If a repair still makes sense, we will say so before quoting a new system.
An air conditioner is an energy-efficient cooling system designed to keep your home comfortable during warm weather. It removes heat and humidity from indoor air, delivering consistent, refreshing cooling throughout your home. Modern air conditioning systems also improve indoor air quality, enhance comfort, and operate quietly while helping reduce energy consumption with high-efficiency performance.
High-efficiency air conditioners are designed to deliver superior cooling while consuming less energy than standard AC systems. With advanced technology and improved performance, they help keep your home comfortable while lowering monthly energy costs. High-efficiency air conditioners provide powerful, consistent cooling with reduced energy consumption.
Variable-speed air conditioners automatically adjust their cooling output to match your home’s needs instead of running at full power all the time. This results in greater energy efficiency, consistent comfort, and quieter operation.Variable-speed air conditioners deliver precise, energy-efficient cooling by continuously adjusting performance based on your home’s temperature.
Smart AC systems combine advanced cooling technology with Wi-Fi connectivity, allowing you to control your home’s temperature from anywhere using a smartphone, tablet, or voice assistant. They provide greater convenience, energy efficiency, and personalized comfort. Smart AC systems give you complete control over your home’s cooling with remote access, and intelligent energy management.
Your house was almost certainly built for heating alone. That single fact shapes most cooling installs on the Eastside.
Cooling needs more airflow than heating does. Duct runs designed for a furnace often choke a new system, so we measure before promising anything.
A condenser needs its own circuit. In a mid-century Bellevue home, the panel is often full before we start.
The outdoor unit needs clearance and a level pad. On narrow Eastside lots, placement takes real thought.
Sound matters when the unit sits ten feet from a bedroom window next door. Quieter equipment is worth the difference here.
Our cooling season is short, which is why systems last so long. It also means everyone books in the same two weeks.
Adding or replacing cooling equipment in Bellevue is permitted work. Filed properly, it stays on record for resale.
Every AC installation and replacement Bellevue quote follows this check. It is a number, not a range.
Efficiency ratings belong to a pair of components, not to the box in your side yard. There is a document that proves your pair is certified, and you are entitled to it.
Ask every contractor for the indoor and outdoor model numbers. Comparing quotes without them is guesswork.
A system’s efficiency rating describes one outdoor unit working with one specific indoor coil. Swap either half and the rating on the brochure no longer describes what you own.
Since January 2026, new systems use R-454B rather than R-410A. The two are not interchangeable, so mixing old and new components is not an option.
Replacing the outdoor unit and reusing an old coil is the cheapest quote you will get. It also caps efficiency and can put the manufacturer’s warranty at risk.
Every certified pairing carries an AHRI reference number you can look up. Any honest installer will give you the model numbers before you sign.
Professional Technicians
(48 Reviews)
Tempra HVAC holds Washington license TEMPRHL753QQ, a $30,000 surety bond, and a $1,000,000 liability policy. All three are public record, so verify them before you book anyone.
Manufacturer warranties cover the equipment. Ours covers the installation itself, for up to ten years, because that is the part we control.
Indoor coil and outdoor unit quoted as a certified pair. Model numbers go on your estimate, and the AHRI certificate comes at handover.
The visit costs nothing and ends with a sized system and one written price. We run a strict no-shortcuts policy, including on the ductwork nobody wants to talk about.
(48+ Google Review)
Our shop sits in Bellevue, so your Eastside call is usually a short drive away. We handle AC installation Seattle homeowners need as well.
King and Snohomish County
Across Bellevue, we cover West Bellevue, Crossroads, Factoria, Somerset, Newport, and Lake Hills. Not on the list? We serve 21 cities across both counties, so call and ask.
We measure the house, inspect the ductwork, check the panel, and work out where the outdoor unit can sensibly go.
You get the sized capacity, both model numbers, the efficiency tier, and one fixed price including permit work.
Most replacements finish in a day. Coil, condenser, line set, and electrical all get done together, and the old unit leaves with us.
Lines evacuated, charge weighed in, airflow measured, and the temperature drop verified. You get the certificate and the paperwork.
Three things move new AC cost Bellevue homes see more than the brand. The cheapest quote usually skips one.
A full matched replacement costs more than an outdoor unit alone. It is also the only way the rated efficiency reaches you.
Systems added to heating-only ductwork sometimes need modification. Ignoring that is how a new system underperforms from day one.
Variable speed equipment costs more and runs better. An older panel may need a circuit or an upgrade before anything is connected.
Every item appears on your written quote before you commit. Financing is available if the timing is awkward.
Not ready to replace? We diagnose cooling faults before quoting anything.
Same outdoor unit, heating included. Worth pricing alongside a new AC.
Spread the cost of a new system across manageable payments.
If a repair still makes sense, we say so before quoting AC installation and replacement Bellevue homes may not need.
Usually yes. To add AC to furnace Bellevue homes already have, a coil sits above it and a condenser goes outside. Both use the ductwork and blower you already have. The catch is airflow, since cooling needs more of it than heating does. We check whether your duct runs can carry it before recommending a system.
Capacity, efficiency tier, and how much work the install needs all move the figure. A straight matched replacement sits well below a first-time installation that needs duct or electrical work. Your free visit ends with one written number rather than a range, and financing is available.
That comes from a load calculation covering square footage, insulation, windows, and orientation. Matching the size of your old unit is not reliable. Many existing systems were oversized when they were fitted. An oversized AC cools fast, shuts off early, and leaves the house clammy.
In almost every case, yes. We quote the coil on every AC installation and replacement Bellevue job. Efficiency ratings describe a matched pair, so reusing an old coil caps performance and can affect the warranty. Since January 2026 new equipment also uses a different refrigerant, which rules out mixing old and new components.
Most AC installation and replacement Bellevue jobs finish in a single day. First-time installations take longer, especially where ductwork or a new circuit is involved. You get the expected schedule with your written quote.
It is worth pricing, particularly if your furnace is also aging. A heat pump uses the same outdoor footprint and adds heating to the same install. A straight air conditioner still makes sense when your furnace is newer, and you only need cooling.
The federal 25C credit expired at the end of 2025 and does not apply to systems installed in 2026. Utility programs run separately, and Bellevue homes are generally served by Puget Sound Energy rather than Seattle City Light. Check current terms with your utility before budgeting around any of it.
Our team answers cooling questions all day, so send yours over.
Talk to a real person about your system, day or night.
+1 (206) 466-0202
